Product Category menu

Deck Paste Level Rod

Product Thumnail Image Zoom

[Basic Infomation]
[Additional Information]
  • Materialplastics, polypropylene
  • Payment TermsL/C,T/T


  • South Korea South Korea
Add to My Interests Send Inquiry
Product Detail Information

Deck Paste Level Rod

│ Description │

- Mostly used for steel frames, and used when the holding method is a steel form (instead of a plywood form) when slabbing concrete.

- Install them on 2m-3m intervals using steel adhesion bond and adjust the level of the level rod to slab. Deposit concrete along the line of the yellow discus.




Necessary when installing a deck plate, and cannot be purchased at construction material stores or hardware stores.

- This bond is a special order product that sticks quickly and does not easily fall.
- It takes five minutes.
- When the temperature is below 0 degrees Celsius, it takes about 30 minutes, but using a torch  lamp will cut the time to five minutes.
- The adhesive and hardener ratio is 1:1. Drop a few drops on the steel where the level rod is installed and rub it well.
- When used too much, it will only hardens slowly.

*Warning: When adhesive and hardener are put in the same container, A chemical reaction will occur and will be hardened.
*Don’t touch the bond with bare hands. 




 - When using for a valley deck, please install it on the top side of the valley



│ Specification │



│ Packing Unit │



│ Example of Construction






Attached File